1.Kilomega Technology for led screen control system
>>One sending card can support maximum 1280*1024 or 2048*640 pixels.
>>Two sending cards cascaded can support 2048*1152 pixels.
>>Single network cable supports maximum 1024*640, 1280*512, 1600*400, or 2048*320 pixels.
2.Pixel by Pixel Correction and Unit box by Unit box Correction Function
>>Pixel by pixel correction supports four kinds of correction modes: single pixel, 2*2pixels, 4*4 pixels, 8*8 pixels; and the max correction is 6144 pixels/module, and brightness 256 levels for red, green, blue.
>>Every unit box correction is used to adjust the chromatism among every unit box; and brightness 256 levels for red, green, blue.
3.Intelligent Identification Function for Indoor and Outdoor LED Screen
>>The intelligent identification program can recognize every kind of scanning mode and every type of signal trend of all kinds of double-color, full-color (real pixel and virtual pixel) drive boards, and the accuracy rate is 99%.
4.Grey Level for LED Display
>>Users can adjust the gray level from 0 to 66536 levels according to requirement of displays, making the display achieve the most desirable effects.
5.Optional Refresh Frequency, Synchronous Function
>>Refresh frequency are adjustable from 10HZ to 3000HZ, and the refresh frequency and phase-lock function can make the display refresh locked at integral multiple of that of computer display, avoiding the image to been torn, and ensuring the image to be perfect.
>>The phase-lock synchronous range is from 47HZ to 76HZ.
6.Super Loading Capacity
>>Full-color receiving card with gray level 4096 (Model 4K) and refresh frequency can support 512*128.
>>Full-color receiving card (model 16K, only for static) with gray level 16384 and refresh frequency 300HZ can control 160*64,.(Remarks: the drive board must realize high frequency 30MHZ).
7.Double Network Cables Switch Automatically
>>The A and B ports of the receiving card can be both used as input ports or output ports.
>>Users can adapt two computers to control a LED display at the same time, when one is out of order, the other will replace it automatically.
>>Users can also use one computer with double network cables to control a LED Screen, when one is out of order, the other will take place of it automatically, making the LED Display Screen work normally all time.
8.Multi-display Synchronous and Combination Functions
>>Supporting one sending card to control multi-LED display, and the multi-display can be willful combination, synchronous display, and independent play, etc. through shortcut key.
9.Brightness 256 Levels Automatic Regulation
>>The function of brightness 256 levels automatic regulation can make the display brightness regulation more efficient.
10.Test Function
>>Receiving card has the test function, no sending card needed; can test the display directly, such as bias, gray level, red, green, blue, etc. many kinds of test modes.
11.Long Transmission Distance
>>The maximum transmission distance is 170M (actual measure); normal transmission distance is 140M.
To be continue…Get more information.please visit: LED Display Screen Manufacturer
