P10 Front Service LED Display is also called P10 front maintenance LED display, they can be maintained from the front side and the rear side of cabinet, and usually used for locations which there is no maintenance room at the back of the LED screen. Compared with traditional P10 fixed installation led display, P10 frontal service LED Screen can realize that the panel can be taken out from the front side and less you worry about maintenance room is not enough for LED display.

Features of P10 Front Service LED Display
- LED: SMD 3in1
- Module Size: 320X160mm
- Module Resolution: 32X16dots
- Cabinet Size: 960X960mm
- Cabinet Resolution: 96X96dots
- Pixel Density: 10000dots/㎡
- Cabinet Material: Iron
- Cabinet Weight: 45kg
- Brightness: ≥7000 cd/㎡
- Service Method: Front and Rear
Advantages of P10 Front Service LED Display
- 10mm pixel pitch is suitable for various applications.
- High brightness more than 7000 cd/㎡ to ensure the LED display work normal even under strong bright sunlight.
- Using latest SMD 3in1 technology to ensure LED with excellent performance and stable quality..
- Front service or rear service is available. Dual-maintenance to make the LED display maintenance is easier & faster
- Modules can be taken out in less than one minute easily, save labor and maintenance cost greatly.
- Easy to installation, the cabinet can be assembled and disassembled easily.
- Strictly IP65 waterproof rating testing to ensure the LED display can work well even in rain cats and dogs environment.
- Ultra wide viewing angel. Viewing angle is up to 140° in vertical and horizontal, providing a wide viewing angle.
P10 Front Service LED Module Panel
UNIT P10 front service LED display adopts 320×160mm size LED display panel with screws holes, pixel pitch is 10mm and the resolution of panel is 32×16 dots, The Panel use high qualtiy SMD 3 in 1 LED and reliable driver IC to ensure the LED display with excellent performance and high brgihtness.

Front View

Back View
Front Service Screws Holes
The front service P10 LED display panel has 16 screws holes to make the module can be mounted on the cabinet strongly, and the modules replacement is easy and fast.


IP65 Waterproof Level
P10 front service LED display With strictly IP65 rating testing to ensure the LED display not only has a excellent waterproof protection level, but also has a good heat dissipation to make the LED display long lifespan and work well In wide temperature range, even in a severe environment.

Save Room
P10 front service LED display can save room greatly with the feature of frontal maintenance. it is suitable for embedded wall installation and wall-mounted installation. also it can be installed in the locations which there is no room to maintain at the rear of the LED display.


P10 Front Service LED Display Case
- Project Location: Thailand
- Pixel Pitch: P10mm
- Panel Size: 320×160mm
- Panel Resolution: 32×16 dots
- Cabinet Size: 960×960mm
- Cabinet Resolution: 96×96dots
- Total Cabinet Units: 15pcs
- Total Display Area: 13.924 sqm
- Service Method: Front and Rear
- Application: Outdoor Advertising

Specification of P10 Front Service LED Display
Pixel Pitch | 10mm |
---|---|
LED | SMD3535 3in1 |
Configuration | 1R1G1B |
Pixel Density | 10000dots |
Module Size | 320×160mm |
Module Resolution | 32*16 |
Cabinet Dimension | 960x960x140mm |
Cabinet Resolution | 96×96 dots |
Cabinet Weight | 45kg |
Cabinet Material | Iron |
MAX Power Con | 600w/sq.m |
AVG Power Con | 300w/sq.m |
Brightness (cd/m2) | ≥7000 cd/m2 (Nits) |
Application | Indoor & Outdoor |
Viewing Angle | 140°(V/H) |
Best Viewing Distance | 10m – 100m |
Control Method | DVI interface, Synchronous/Asynchronous control / 4G / WIFI |
Input Signal | Composite, S-Video, component, VGA, DVI, HDMI, HD-SDI |
Working Voltage | AC100/240V 50/60HZ |
Working Temperature | -20℃~+60℃ |
Lifespan | 100,000 hours |
Frame Frequency | ≥60Hz |
Refresh Frequency | ≥1920Hz |
Blind Spot Rate | <1/10000 |
Screen Plainness | <±1mm |
Gray Level | 14bits input, 4096 levels(212) |
Download Specification
Specification of P10 front Service LED display
Application of P10 Front Service LED Display
P10 front service LED display is usually used for those applications which there is no room at the back of the LED display, It is not only can be maintaned from the frontal side, but also can be serviced at the rear side of the LED display. UNIT P10 front service led screen offer high brightness and high IP65 waterproof outdoor solutions for you on media advertising.